Produktai skirti apdorojimo užsakymų grąžinimas (784)

Sensors are the sensory organs of technical equipment and important components in all areas of automation. Temperatures, pressures, movement and a variety of other analogue values are detected, converted and digitally transmitted to the higher level field system. MicroControl systems are ideally suited for these applications. Up to 10 times faster and a significantly higher data throughput, 16…24 bit resolution for higher accuracy, a wide temperature range and high IP rating provide higher operating reliability, e.g. in food technology or chemical industry.

CAN (Controller Area Network) is a network concept that has been developed for the automotive industry originally. Today, CAN is especially used in networking industrial control systems, sensors and actuators based on the field bus technology. In our CAN-bus training you will learn about the physical properties of a CAN-bus system as well as protocol structure. The participants will look into the theory of hardware and software design and improve their knowledge in practical units. This CAN-bus training course forms the basis for our advanced-level workshops on CANopen and J1939. Target group CAN-bus training The target group of the CAN-bus workshop is development engineers who are looking for a quick start into the ISO standard 11898-1:2015 (Road vehicles – Controller Area Network). Also, we address decision makers and product managers to enable them to assess the suitability of the CAN-bus standard for their applications.

The CANopen Bootloader protocol stack provides the complete functionality for integration of a bootloader according to the CANopen standard in your existing devices. Versatile configuration options facilitate individual customization to a target product. The Bootloader was implemented to meet low storage requirements. The CANopen Bootloader stack comprises a reduced object dictionary and supports NMT, SDO (Expedited/Segmented/Block), Emergency, Heartbeat as well as LSS services. Up to four separate sections for storage of programmes and data may be defined. The CANopen Download Tool is used to update programmes and data of the target hardware. A defined API facilitates adjustment to a flash memory of the target hardware. Flash drivers for various controllers (e.g. STM32 series) are part of the CANpie driver.

The µCAN.1.ai-BOX is a decentralized universal data acquisition module for analogue standard signals (current / voltage). The CAN interface supports the protocol CANopen. Voltage +/- 10 V:Current 0(4)…20 mA Accuracy 0.01 % (FS):Resolution 16-bit (1 mV / 1 µA) Sampling rate 20 ms / 50 Hz:Galvanically isolated fieldbus Feldbus CAN:Protocol CANopen / Raw CAN

From the Idea to Prototyping to Series Production and Evolution – MicroControl plans, develops and manufactures individual solutions. MicroControl experts will work in close liaison with the customer to realize hardware and software for the desired application. In a following step, a prototype will be developed and manufactured – either by the customer or MicroControl. In the conceptual stage, the required technical specifications of the customer’s application are checked continually.

The µCAN.4.ai-BOX is an extended universal measurement module for the acquisition of analogue standard signals. The device is designed for measuring signals of +/- 10 V, 0…20 mA or 4…20 mA. The CAN interface supports the protocol CANopen. Voltage +/- 10 V:Current 0(4)…20 mA Accuracy 0.01 % (FS):Resolution 16-bit (1 mV / 1 µA) Sampling rate 5ms / 200 Hz:Resolution up to 24-bit (0,01 mV / 0,01 µA) Fieldbus CAN:Protocol CANopen / Raw CAN

From Antarctica to underground ring accelerators or field trials in biodiversity – MicroControl solutions reliably work in long-term trial settings of renowned institutes, universities and research companies. The high performance reserves of MC systems provide maximum reliability in all kinds of conditions. To achieve the best results the MicroControl experts assist researchers all over the world to find the most suitable solution.

Our online courses are held in two compact sessions of four hours each, which will save time and travelling costs. Training material (PDFs) and certificate of attendance are included. The webinars are held in German or English.Our online courses are held in two compact sessions of four hours each, which will save time and travelling costs. Training material (PDFs) and certificate of attendance are included. The webinars are held in German or English.

Equipped with CAN or CANopen interfaces and a 19″ slide-in casing, the MicroControl µLAB is particulary suitable for measuring electric, thermal and mechanic signals in engine or components testing facilities. The signal wires are connected to the module by plug-in connectors in the front plate. Voltage +/- 10 V:Accuracy 0.01% (FS) Resolution 16-bit (1 µA):Sampling rate 5ms / 200 Hz Operating temperatures -40…+85 °C:Operating temperatures -40…+85 °C Fieldbus CAN:Protocol CANopen / Raw CAN

Solar power plants, wind parks and combined heat and power systems have established in energy generating technology. To achieve a high operating reliability, MicroControl solutions ensure perfect system control and precise transfer of measurement data. As for example in the adjustment of solar panels, in temperature measurement in block-type thermal power plants or in torsion measurement in wind power stations.

The module µCAN.1.sg-SNAP is designed to acquire strain gauge measurement signals such as forces, torques, sequences and voltages and transfers them via CAN. Voltage 0…100 mV:Supply voltage 9.0 V Strain gauge full bridge:Sampling rate 20 ms / 50 Hz Accuracy 0.1 % (FS):Resolution 16-bit (1 mV) Fieldbus CAN:Protocol CANopen / Raw CAN

CAN specifications of Bosch form the basis of all CAN implementations and comprise both 2.0A (standard frames) and 2.0B (extended frames) standards. (PDF formate, 189 KByte, in English). You will find a choice of valuable information at www.bosch-semiconductors.com CAN on the internet For more information on CAN please visit the following websites: CAN in Automation e.V. The manufacturer and user organization CAN in Automation offers a wide range of information on CAN. In particular, you will find an overview of higher layer protocols here (e.g. CANopen).

The transducer unit µCAN.8.ti-SNAP is equipped with 8 inputs for thermocouples or Pt100 sensors. The integrated CAN interface supports CANopen and J1939 protocols. Bit rate and node-ID may be set via DIP switches inside the device or via LSS. Temperature thermo type J, K, L, N, R, T:Temperature Pt100/Pt1000 (2-wire) Accuracy +/- 0.5 K (Thermo):Accuracy +/- 0.2 K (Pt100) Resolution 16-bit (0.1 °C):Sampling rate 20 ms / 50 Hz Sensor error detection:Protocol CAN / CANopen / Raw CAN / J1939

Modern operating tables are miracles of precision. In laser eye surgery an accuracy to one thousandth of a millimetre is crucial. For other operation methods, lighting of the operating area is important. Also, smooth and precise movement of the operating table as well as reliability and durability of respirators are essential features. And precision is a matter of life and death. MicroControl has a long-term expertise in this kind of challenging applications and provides highly reliable solutions for medical equipment with precise control units and bus technology.

The µCAN.8.dio-SNAP is a freely configurable digital I/O module featuring 8 channels. Module ID and bit rate can be set via DIP switch or via CAN bus (LSS, CiA 305). The module supports the protocols CANopen CANopenFD and J1939. Digital input or output:Input or output freely configurable Output drivers can be supplied separately:Each output to be charged with max. 1 A Each output to be charged with max. 1 A:Fieldbus CAN / CAN FD Protocol CANopen / CANopen FD:Protocol CANopen / CANopen FD

The cable transmitter µCAN.1.sg-TRS is the universal data acquisition module for standard analogue full bridge strain gauge signals. The bridge is powered via the transmitter. The TRS family is ideally suited for being integrated directly in the measuring lines at a short distance from the sensor. Voltage ± 20 mV:Supply voltage 4.5 V Strain gauge full bridge:Accuracy 0.2% (FS) Resolution 16-bit (1 µV):Sampling rate up to 1kHz Fieldbus CAN classic / CAN FD:Protocol CANopen / CANopen FD / J1939

The SAE J1939 standard (Serial Control and Communications Heavy Duity Vehicle Network) has originally been designed by SAE International to be used in heavy duty vehicles. In the meantime, the protocol is widely used also in agricultural machinery, rail vehicles and sea vessels and in a wide range of diesel-driven machinery. Target group J1939 training The target group of the J1939 intensive workshop is development engineers who are looking for a quick start into handling the communications profile or would like to get an insight into the J1939 protocol stack. Also, we address decision makers and product managers to enable them to assess the suitability of the J1939 protocol stack for their applications.

Equipped with CAN or CANopen interfaces and a 19″ slide-in casing, the MicroControl µLAB is particulary suitable for measuring electric, thermal and mechanic signals in engine or components testing facilities. The signal wires are connected to the module by plug-in connectors in the front plate. Temperature thermo type K:Accuracy +/- 0.5 K Resolution 16-bit (0.1 °C):Sampling rate 10 ms / 100 Hz Sensor error detection:Equipped with cold-junction compensation Operating temperatures -40…+85 °C:Power supply voltage 9…36 V DC Fieldbus CAN:Protocol CANopen / Raw CAN

The modul µCAN.4.ao-SNAP features four independent analogue outputs which optionally provide a voltage or a current signal. The CAN interface supports CANopen and J1939 protocols. Voltage +/- 10 V:Current 0(4)…20 mA Accuracy 0.05 % (FS):Resolution 16-bit (1 mV / 1 µA) Signal output 1 ms / 1 kHz:Signal type freely configurable Fieldbus CAN:Protocol CANopen / Raw CAN / J1939

Linux is an open operating system. The term “Linux” actually refers to the Kernel of a unix-related operating systemes (derivative). The term is often used as a synonym for the complete operating system (distribution). Further to the programmes necessary in an operating system, e.g. for file and user management, additional graphic frontends, office applications, multi media tools, databases, web browsers and other programmes are covered. Linux is freely available, i.e. the sources are open and the systems may easily be adapted to the individual application. Linux is freely copiable and there are no software license fees and, in addition, it is non-proprietary.

The µCAN.8.pwm-SNAP unit is equipped with 8 outputs which provide pulse width modulated signals (PWM) within the range of 0% to 100% for controlling of actuators (valves etc.) PWM output:Basic frequency 40 Hz … 5 kHz Mark-to-space ratio 0.0 % … 100.0 %:Each output to be charged with max. 1.4 A Fieldbus CAN:Protocol CANopen / Raw CAN

The cable transmitter µCAN.1.ti-TRS is designed for the acquisition of one temperature signal and its digitization for being processed via CAN bus. The TRS module is integrated directly in the measurement line at a short distance from the source to avoid interference effectively. Temperature Thermo type J, K, L:Temperature Pt100, Pt1000 (2-wire) Accuracy ± 0.5 K (Thermo):Accuracy ± 0.2 K (Pt100) Resolution 16-bit (0.1 °C):Sampling rate up to 1 kHz Fieldbus CAN classic / CAN FD:Protocol CANopen / CANopen FD / J1939

Gewindestück Gewindestange nach DIN 976, Form A + B, als kundenspezifischen Artikel in jeder Losgröße, allen gängigen Güten und Oberflächen. Unsere Gewindestücke und Gewindestangen nach DIN 976 zeichnen sich durch ihre hohe Qualität und Genauigkeit aus. Wir sind spezialisiert auf die unterschiedlichsten Abmessungen und Oberflächen. Werkstoffe S235, S355, C45k, 36Mn6, 42CrMo4, A2, A4 und Sonderwerkstoffe auf Anfrage Oberflächen roh, galv. verzinkt, dickschichtpassiviert, feuerverzinkt, ZinkNickel Beschichtung und Zink Lamellenbeschichtung Größen:M4 bis M48 Länge:15 mm bis ca. 4000 mm HERKUNFTSLAND:Deutschland

With CANopen, the user organization CAN in Automation (CiA) has created a protocol standard which has widely spread in embedded systems and mechanical engineering. CANopen specifications not only define various services for data exchange, they also specify standardized access to the systems via device profiles and application profiles. Target group CANopen training The target group of the CANopen workshop is development engineers who are looking for detailed knowledge about the communication profile or would like to get an insight in the CANopen / CANopen FD protocol stacks.

The µCAN.4.ci-BOX is equipped with 4 fast counters of up to 100 kHz. The CAN module acquires and processes the binary pulses and transmits them to a higher-level system. Counter input / frequency measurement:A/B signal Max. input frequency 500 kHz:High precision frequency measurement Signal type freely configurable:Up or down counter Fieldbus CAN:Protocol CANopen / Raw CAN

Wir fertigen Rechteckbügel als kundenspezifischen Artikel in jeder Losgröße, allen gängigen Werkstoffen, Güten und Oberflächen. Unsere Rechteckbügel zeichnen sich durch ihre hohe Qualität und Genauigkeit aus. Wir sind spezialisiert auf die unterschiedlichsten Bügelformen und Abmessungen. Werkstoffe S235, S355, C45k, 36Mn6, 42CrMo4, A2, A4 und Sonderwerkstoffe auf Anfrage Oberflächen roh, galv. verzinkt, dickschichtpassiviert, feuerverzinkt, ZinkNickel Beschichtung und Zink Lamellenbeschichtung Größen:M4 bis M36

Ankerstangen, Zugstangen, Doppelenden und Ankerschrauben sowie die dazugehörigen Ankerplatten als kundenspezifischen Artikel in jeder Losgröße, allen gängigen Güten und Oberflächen. Unsere Ankerstangen, Zugstangen, Doppelenden und Ankerschrauben sowie die dazugehörigen Ankerplatten zeichnen sich durch ihre hohe Qualität und Genauigkeit aus. Wir sind spezialisiert auf die unterschiedlichsten Abmessungen und Oberflächen. Werkstoffe S235, S355, C45k, 36Mn6, 42CrMo4, A2, A4 und Sonderwerkstoffe auf Anfrage Oberflächen roh, galvanisch. verzinkt, dickschichtpassiviert, feuerverzinkt, ZinkNickel Beschichtung und Zinklammellenbeschichtung Größen:M4 bis M80 Länge:15 mm bis ca. 4000 mm HERKUNFTSLAND:Deutschland

Schaukelhaken als kundenspezifischen Artikel in jeder Losgröße, allen gängigen Güten und Oberflächen. Unsere Schaukelhaken und haken zeichnen sich durch ihre hohe Qualität und Genauigkeit aus. Wir sind spezialisiert auf die unterschiedlichsten Formen und Abmessungen. Werkstoffe S235, S355, C45k, 36Mn6, 42CrMo4, A2, A4 und Sonderwerkstoffe auf Anfrage Oberflächen roh, galv. verzinkt, dickschichtpassiviert, feuerverzinkt, ZinkNickel Beschichtung und Zink Lamellenbeschichtung Größen:Ø4 bis Ø36 HERKUNFTSLAND:Deutschland

Trägerklemme Klemmsatz HEB / IPB / HEA Für Rohrschlitten / Rohrlager und Gleitlager mit TÜV Abnahme in Stahl oder Edelstahl. Material S235, S355, 1.4301 (A2) und 1.4571 (A4), sowie andere Werkstoffe bei entsprechender Fertigung von PKS und PKR Klemmsystemen mit TÜV Gutachten zur Befestigung von Rohrschlitten / Gleitlagern und Rohrlagern an Stahlbauträgern. Das Klemmsystem kann mit Abhebesicherung sowie Gleitplatten und Gleitplättchen gefertigt werden. Für Detailinformationen laden Sie sich bitte unseren Produktkatalog herunter oder sprechen uns an. Oberfläche:roh, galvanisch verzinkt feuerverzinkt Bolzen:M12 bis M20 HERKUNFTSLAND:Deutschland

Anschweißenden nach DIN 525 oder als kundenspezifischen Artikel in jeder Losgröße, allen gängigen Güten und Oberflächen. Unsere Gewindestücke und Gewindestangen nach DIN 976 zeichnen sich durch ihre hohe Qualität und Genauigkeit aus. Wir sind spezialisiert auf die unterschiedlichsten Abmessungen und Oberflächen. Werkstoffe S235, S355, C45k, 36Mn6, 42CrMo4, A2, A4 und Sonderwerkstoffe auf Anfrage Oberflächen roh, galvanisch verzinkt, dickschichtpassiviert, feuerverzinkt, ZinkNickel Beschichtung und Zinklammellenbeschichtung Größen:M4 bis M48 Länge:15 mm bis ca. 4000 mm HERKUNFTSLAND:Deutschland