Produktai skirti apdorojimo užsakymų grąžinimas (3471)

Überkopfdrahtabläufe der DF-Reihe dienen der störungsfreien Zuführung des Drahtes zur Maschine. Hierzu verfügen Sie über ein Bremssystem und einen Tänzer zur Zugspannungsregelung. Der DF 100 kann für Drähte mit einem Durchmesser von 0,04 – 0,3 mm verwendet werden.

Method for determining the grain size; air jet sieve, vibrating sieve, but also used in a production system for separating the coarse component of a powder so as to obtain the desired grain size distribution. Using acceleration to separate particles of different weights and therefore mostly different sizes.

CNC-Metallbearbeitung, Die Stanztechnik erfolgt in einem Maschinenpark aus Hydraulik- und Exzenterpressen. Hubkraft Hydraulikpressen (umformen, kalibrieren) = 65 to. Hubkraft Exzenterpressen (Einlegearbeiten, stanzen) = 100 to. Wir verfügen über einen eigenen Werkzeugbau, der für die Instandhaltung der bestehenden Werkzeuge zuständig ist und den Neuwerkzeugbau in Eigenregie durchführt

Aluminum support processing.

Incluso con superficies de banda lisas es posible transportar artículos de forma inclinada. El ángulo de transporte necesario para ello dependerá, entre otros factores, de la composición del artículo transportado, del revestimiento de la cara portadora y de influencias externas como el polvo y la humedad. Para ángulos de transporte grandes y el transporte de pequeñas piezas y mercancías a granel, Forbo Movement Systems suministra cintas transportadoras estructuradas o provistas de perfiles transversales.

Thanks to the robust steel frame, our T-Rex CNC mill enables you to produce precisely, quickly and cleanly. Even with workpieces made of hard material, you will achieve ideal results, thanks to the high stability of the CNC machine, which is guaranteed by the robust construction. On this machine, you can even process thicker plate material, as the clearance height of the Z-axis is 200 mm. Versatile application possibilities: drilling, cutting or engraving in different materials such as plastic, wood, granite, marble, stone and metal can be done with high accuracy. Basic equipment: > vacuum table with several zones > manual central lubrication > KinetiC-NC control software > ergonomic control panel with integrated CNC control > full version of the design software ConstruCAM-3D > Estlcam software CE-compliant commissioning of our CNC machines requires the attachment of the protective housing and the exhaust connection. X axis travel:1200 mm Y axis travel:1300 mm Z axis travel:200 mm (300/400 mm optional) Clearance height:220 mm (320/420 mm optional) Clamping Area X :1230 mm Clamping Area Y:1320 mm Machine lenght:1970 mm Machine width:2150 mm Machine height:1950 mm Weight:900 kg Backlash:+/- 0,015 mm Repeat accuracy:0,01 mm max. rapid speed:17000 mm/min max. oprerating speed:12000 mm/min

Der ECKOLD Kraftformer KF 470 Medium - die Umformmaschine zum Strecken, Stauchen, Nachformen, Schweifen, Glätten, Spannen, Wölben (Bombieren) und Richten Die elektronische Anzeige der Steuerung visualisiert Bedienungsfunktionen, Fehlerdiagnose sowie Wartungsintervalle. Speicherbare Bearbeitungsprogramme erlauben wiederholbare Ergebnisse. Der KF 470 eignet sich sehr gut für Bleche im industriellen Metallbau, denn er formt auch größere Teile mit Blechdicken von bis zu 3 mm Stahlblech. Die Maschine ist mit einem großen Werkzeugprogramm erhältlich (Werkzeuge nicht im Lieferumfang der Maschine enthalten). • 2 vorwählbare Hubgeschwindigkeiten • Einstellbare Rückfahrposition • 4 speicherbare Bearbeitungsprogramme • Wiederholbare Ergebnisse • Elektronische Anzeige/Fehlerdiagnose • Elektrischer Antrieb Max. umformbare Blechdicke: Stahl 400 N/mm²: 3,0 mm Aluminium 250 N/mm²: 4,0 mm Inox 600 N/mm²: 2,0 mm Kontaktieren Sie uns für ein individuelles Angebot inkl. Werkzeugen! Technologie:Umformen Antrieb:Servomotorisch Ausführung:Stationär Branchen:Automobil, Stahlbau, Metallbau, Flugzeugbau, Handwerk, Restauration Material:Aluminium, Stahl, Edelstahl

An increase in productivity thanks to loading and unloading during the cutting process Workpiece removal during the cutting process at the collecting table possible The material feed is stretching-free Accurate placement of the workpiece through automatic edge control with the Feeding Unit Optional camera recognition system for automated processing Optional marking systems (e. g. Ink Marker) Processing of very large formats by edgeless continuation of cuts possible.

Ce système vous offre la possibilité de nettoyer les élastomères dans un processus continu avec une efficacité maximale (le lavage à l’eau déionisée, déminéralisée ou ultrapure est facultatif). Les paniers de lavage sont automatiquement acheminés vers les stations de lavage respectives (> station de prélavage> station de rinçage> station de nettoyage haute pression> station de séchage haute pression) vers le magasin de retrait, à partir de la station de chargement. Les dimensions du lave-linge à processus continu dépendent des dimensions du panier que vous souhaitez (perforation de 3 mm à 15 mm possible), les modèles WD3, WD5 et WD9 avec différentes tailles sont disponibles en standard. Ce système est parfaitement équipé pour les exigences de l’Industrie 4.0. En standard, les données de processus peuvent également être surveillées à partir d’un poste de travail externe via le réseau (en option, via un serveur OPC UA). La construction se fait individuellement!

Stooss abluftconsulting GmbH bietet präzise Immissionsprognosen, um die Auswirkungen von Emissionen auf die Umwelt frühzeitig zu bewerten. Durch modernste Simulationsverfahren und Analysen unterstützen wir Unternehmen bei der Einhaltung gesetzlicher Auflagen und der Minimierung von Umweltrisiken.

Giessringe - Giessringe für Hot-Top-Casting und Gas-Slip-Systeme

Superhartes Alternativprodukt zum Diamant / feinklassierte Körnungen in reproduzierbaren Qualitäten / Bearbeitung von Sintermaterialien und sehr harten Materialien

Ionisation of the air The Antistat AMW ioniser for trouble-free processing of synthetic materials and of textiles with high charge separation. By ionising the ambient air, the electrostatic charge is diverted from the product sheet. Antistat AMW can be used at high or low speeds.

Unsere PTFE / PFA-Schläuche erhalten Sie als Meterware oder als Konfektionsware mit ein oder zwei Edelstahlgeflechten, mit gewellter oder glatter Innenseelen und mit oder ohne Glasseidenverstärkung. Wir liefern die Schläuche sowohl als Einzelanfertigung als auch in Serienfertigung.

Additive Manufacturing / 3D Printing using the MJF process with a build volume of up to 380x284x380 mm. Additive Manufacturing / 3D Printing not only offers unparalleled variety of shapes and design freedom but also additional features such as mass customization or lightweight construction. Take advantage of the benefits of this innovative technology to stand out from the competition and manufacture more efficiently than ever before. We accompany you at every stage of the process! Personal consultation is extremely important to us so that you can understand and optimize the benefits of the technologies. Contact us. info@ewoqe.com

CNC-Drehteile aus Kunststoff

TenderFox® TenderFox® has been developed to combat production and storage losses in meat and fish and to give a greater yield. TenderFox® is strongly effective when injected as a spray brine into meat and fish. In order to permit reliable and simple processing, TenderFox® is also available as a liquid product for high-concentration brines. In the case of high-volume injection (from 30% injection volume), it is solely available in powder form, including brine stabilisation. Starting from the versatile basic seasoning, TenderFox® is also available in the aroma variants Roast, Smoked and cured and Boiled ham and in the flavours poultry, pork and beef. In combination with TopFox® dry seasoning, TenderFox® can be further used in many other ways, e.g. in the flavours lamb, herbs, chili or smoke. TenderFox® gives you optimum value creation combined with a tiptop flavour – a unique solution. Benefits at a glance: Flexible increase in value creation Simple to use

Der Trockner ist ein hybrides Temperatur-/Druckschwankungs-Adsorptionssystem, das sich leicht in eines unserer H2 Core HydroCab- oder Cluster-Systeme integrieren lässt. Mit dem Trockner DRY 2.1 kann die Wasserstoffreinheit sogar auf 99,999 % erhöht werden.

Well-rounded: The ASP 460 derinder was designed specifically to process round cuts such as ham, shoulder and haunch. Advantages Clean removal of the rind without remnants Perfect speed regulation in combination with the Weber tension roller Variable adjustment of the rind or cutting thickness Moveable with swivel and fixed castors Space-saving With integrated bucket support and low space requirement User friendly Foot lever as standard Options: Foot switch or body operated lever Special tables Special rollers Special voltage Motor output (kW):0,75 Cutting width (mm):460 Height (mm):1010 Width (mm):605 Length (mm):865 Weight (kg):205 Power supply (V/Hz/A):400/50/16

Electrical process flow heaters The “STR-TWIN type electrical heater comprise a large range of process flow heaters for industrial application custom built to meet client specification. Due to the small diameter construction of the vessel it is perfectly suitable for low volume or mass flow. These heaters are supplied CE marked in acc. the latest CENELEC requirements or manufactured to the latest IEC standards. Typical electric process heaters applications include heating of liquids i.e. heat transfer oil or fuel oil, glycol reboilers and water heaters and heating of pressurized gases i.e. pressurized air, superheated water steam, nitrogen or other compositions of gases. Thyristor control systems are also designed and supplied by OhmEx to control the range of electric process heaters. We are pleased to advice on the most suitable control system for your heating application.

The Autovent 3000 ensures optimal cooking processes at smallest weight loss without any fans at all! Instead, the system's patented nozzles use the internal dynamics of lowpressure steam, converting it into air speed and heating energy. For you, this means Shorter cooking times and weight loss reduced by up to 15%! High turbulences due to patented AUTOVENT nozzles and air velocities of up to 200 m/s Short cooking times and up to 15% less weight loss Temperature difference across the system no more than 1 °C Uniform products at highest quality Very low maintenance and operation costs from dispensing with fans Long service lives from stainless steel construction and steamtight welding allround

We are specialized in performing thermal shock testing of electronic and mechanical assemblies and have a lot of experience with the requirements of the automotive industry and medical technology. On behalf of our customers, we perform environmental and climatic tests according to customer specifications and applicable standards, thus uncovering optimization potential. We will be happy to advise you with regard to your testing tasks and, together with you, transfer the entire testing process into a specification sheet. OUR OPPORTUNITIES 2-chamber system air-air Test chamber volume up to 130 liters Temperature range hot chamber 50°C to 200°C Temperature range cold chamber -80°C to -100°C Change between chambers <15 seconds Maximum test material weight 25 kg State monitoring of the test specimens during the test

Freek pump and gas line heaters for trace heating are designed to regulate temperatures in order to prevent freezing or condensation in the line. As with all our heaters, these can be designed and produced to your bespoke specifications. A most frequent application for gas & pump line heaters the semi-conductor process in which gases such as Tetraethyl Orthosilicate (TEOS), Boron Trichloride (BCl3), Aluminium Chloride (AlCl3), Chlorine Triuoride (ClF3) and Dichlorosilane (DCS) condense at low temperatures. Should this occur, it could result in wafer defect. Gas and pump line heaters consistently heat the lines and provide a simple heating solution and prevent condensation build up. The optimum line temperature will vary depending on the process.

Wir nutzen diesen hochwertigen Rohstoff, um in einem schonenden Verfahren das goldene Weizenkeimöl zu gewinnen und die Weizenkeimmehle und -granulate zu stabilisieren. Unsere Weizenkeime sind besonders geeignet für den Einsatz in Backwaren, Cerealien, Schokolade, Süßwaren und Sportlernahrung.

When it comes to seat heaters, we at Embro think first and foremost of the textile processors of vehicle seats. Because our textile heating elements are in great demand in the automotive industry. They are easy to process, flexible, and kink-resistant. The heat output is individually adapted to the customer’s requirements in the development process and suitably distributed and laid out on the desired surface (wire laying). With the increasing number of electric vehicles being produced, the demand for further heating solutions for the interior area is also rising. Embro heating mats heat the seats and interior via heating elements in the center and side armrests and trim parts. As a developer or engineer in the automotive sector do you need a specific heating element for a product? We are looking forward to your ideas! Country of origin:Germany Production method:CNC embroidery technology Areas of application:automotive industry, aircraft construction, vehicle construction, agricultural machinery

We coat rollers up to 3 m in diameter and weighing up to 2 t! We will be happy to provide you with rollers complete with wheels. We have good international contacts for procuring wheels made from steel, aluminium and stainless steel. Upon request we can mill a profile in the coating or form profiles directly during casting.

Demag components for process cranes turn a crane into a fully fledged process crane, without the need for any additional design or development work. They're fast, safe and reliable, making these components extremely worthwhile elements of the Demag process crane engineering product line. The individual components – MPW open winch units, MPW open winch crabs and corner-bearing end carriages – are proven components that have been tried and tested for many years. They are individually configured to meet the specific requirements of your process crane. The variety of possible applications is virtually unlimited. See all the performance details and benefits on the product pages. HCW High Capacity Winch Crabs:Dedicated service interfaces for all components, Single or double hooks with optional features MPW open winch units:matching modular components, compact arrangement of drive, brake and gearbox MPW open winch crabs:Modular design, Few connection interfaces, Jig-built crab frame Demag SafeControl:Crane operation additionally protected by continuous, independent monitoring of basic crane function

0,025 mm; 0,050 mm; 0,075 mm; 0,100 mm je 1 Rolle 150 x 1200 mm Wir sind ein mittelständisches Unternehmen, welches sich auf die Lieferung von dünnen Metallfolien mit enger Dickentoleranz spezialisiert hat.

BEKOSPLIT splitting plants clean emulsified condensates which occur as a result of unfavourable initial conditions or of certain lubricant/compressor combinations. In addition to compressed-air condensate, other oil-containing industrial wastewaters can also be processed. Water-insoluble organic substances and a large variety of solid contaminations are removed from the water. Any heavy metals, dirt and paint particles contained in the water are reliably adsorbed Application:Treatment emulsion-containing condensate

The ProFeeder Compact from EasyRobotics is a robust robotic cell with compact dimensions that can be easily moved in your production. The ProFeeder Compact is placed separately in front of the machine to be operated. Then an ER Work or an ER Pedestal is positioned in front of the machine. The robot is located on the ER Work / ER Pedestal. The robot now takes workpieces from the ProFeeder Compact and loads and unloads the machine. It then loads the workpieces back into the ProFeeder Compact. This results in advantages for you, such as more space in your production, quick adaptability for different workpieces and a mobile robot cell. Thanks to the simple design of the drawers of the ProFeeder Compact, workpieces of various sizes and lengths can be processed without major changeover work. Cell dimensions:780 x 610 x 1083 mm Dimensions of storage tray:600 x 400 mm max. height of tray:127 mm Number of storage trays:6 trays max. weight per tray:60 kg Cell weight:approx. 200 kg (without robot)