Produktai skirti apdorojimo užsakymų grąžinimas (44)

WEYTEC IP Remote USB provides a transparent USB channel for devices such as hard disks, flash drives, fingerprint and card readers, audio devices, webcams and more. In combination with a WEYTEC distributionPLATFORM, USB connections can be switched between desks and PCs. At a glance Extend any USB device over standard IP networks Transparent USB (no drivers required) USB 2.0 HiSpeed Switchable, in combination with a WEYTEC distributionPLATFORM (WDP) Can be integrated into existing WEYTEC systems Works across multiple sites / network segments Builtin to WEYTEC KVM chassis and/or boxes

Probes for process control Probes are available to measure the different process parameters. These values can be displayed on our monitoring instrument and recorded in our bls software, see measure & control. Frequently measured parameters are: temperature pressure stirrer speed torque pH IR probes, probes to control particle sizes etc. from other suppliers can be integrated into our pressure reactors or stirred autoclaves.

WEYTEC KVM over IP solutions house all your PCs and information sources in a centralized server room where they are stored, protected, cooled costeffectively, and maintained easily and efficiently. This saves electricity, increases the average life span of hardware, precludes breeches of IT security and virtually eliminates expensive moves, adds and changes. In case of a PC failure, users can switch instantly to a spare device. KVM over IP solutions enhance workflow efficiency, workplace ergonomics and IT security. At a glance Remote dedicated, shared and switched PCs Digital transmission, standard IP Available with DVI (VGA) and DisplayPort Video resolutions up to 2x 5K@60Hz or 1x 8K@60Hz Transparent USB 2.0 Dual channel stereo audio Data transmission over copper and/or fiber with corresponding SFPs Increased rack density with dual transmitters and receivers Universally applicable for all hardware platforms No distance limitations

Single instrument for simultaneous process density (specific gravity), viscosity and temperature measurement Compact form-factor for simple installation Real-time, stable, repeatable and reproducible measurements in Newtonian & non-Newtonian fluids Measures kinematic and dynamic viscosity All metal (316L Stainless Steel) construction Completely insensitive to mounting conditions Operational to 7500 psi (500 bar) and 575°F (300°C) Threaded, flanged and sanitary process fittings Easy to clean, no maintenance or re-configurations needed Scale across multiple locations/installs without application re-engineering

Customized parallel pressure reactor system Reactor volume: 50 ml - 300 ml Number of reactors: 2 - 6 Pressure: -1.0 (FV) to +150 bar Temperature: -20 °C to +300 °C Material: stainless-steel, Hastelloy®, tantalum, PTFE inliner Other setups are available. Catalyst screening and Hydrogenations in reduced time, reproducible and safe: These were the key issues for our customer in chemical research, asking us to develop this system. This parallel pressure reactor system is configurable and modular, allowing for individual or parallel operation settings of each reactor. This system uses automated process control enabling fast process development and parallel reaction screening in a reproducible and safe manner. Multiple safety features guarantee safe hydrogenations and other processes. Reactor volume:50 ml - 300 ml Number of reactors:2 - 6 Pressure:-1.0 (FV) to +150 bar Temperature:-20 °C to +300 °C

The smartVISUAL Master is the basis of WEYTEC‘s visualization solutions. Together with smartVISUAL receiver, they administer and control real and virtual video walls as well as decode and display video streams. smartVISUAL integrates separate displays into a continuous visualization surface. At a glance Resolutions up to 4K @60Hz Hardwarebased, without software installations Independent of operating system Video sources can be displayed in freely scalable windows on screens and video walls Unlimited number of sources and screens Redundant configuration Compatible and integrated with WEYTEC switchingPLATFORM, WEYTEC distributionPLATFORM and WEYTEC visualizationPLATFORM

The WEYTEC IP Input / Output (IP I/O) cards receive, distribute and forward events within a WEYTEC KVM matrix system. IP I/O cards provide interfaces between WEYTEC IP devices and third party peripherals. In combination with a smartTOUCH keyboard or a WDP system, IP I/O cards detect incoming events and trigger outgoing events, interacting with visualization solutions, communication and radio systems, building management technology and more. At a glance Four switchable relays (IP I/O Relay card) Four optocouplers (Input card) Four serial interfaces (RS232 card) Compatible and integrated with WEYTEC products and solutions

The Audio Alert Detector converts analog audio alarms on WDP sources into events and transmits them within the WEYTEC KVM system. For example, an acoustic signal can be heard and a visual indication appears on predefined smartTOUCH keyboards and their displays. An overview page documents the status and acknowledgement phase of alarms from individual systems. Alarms and video signals from the relevant computers can also be visualized on a monitor and a video wall, or forwarded to an external system. At a glance Supports all sources with an analog audio output (3.5 mm jack) Hardwarebased No software installations required on sources Acoustic and visual indication in the KVM system Compact design Compatible and integrated with WEYTEC KVM products and solutions

Mit der neuen automatischen Spielkartenproduktionsanlage zum inline Stanzen, Zusammentragen und Stapeln von Spielkarten kann eine breite Palette von Karten, einschließlich Spielkarten, Gesellschaftsspielkarten, Sammelkarten und Sportkarten in einem Arbeitsgang ausgestanzt, gestapelt und an eine nachgeschaltete Einheit weitergeleitet werden. Das System besteht aus der marktführenden rotativen Stanzmaschine BSR 550 Servo mit Paletten- oder Flachstapelanleger und der automatischen Spielkartenauslage ACC 550 HS. Die Karten werden haltepunktfrei ausgestanzt, inline ausgebrochen, geschuppt und über ein Transportband der Spielkartenauslage ACC 550 HS zugeführt. Der ACC 550 HS stapelt jede Reihe zu einem vollständigen Deck und leitet diese an ein nachgeschaltetes Verpackungssystem, wie Cellophaniermaschinen, Banderoliermaschinen oder Verpackungsmaschinen weiter. Die Anlage kann von einer Einzelperson bedient werden und hat eine Produktionsraten von bis zu 2‘000 Decks pro Stunde.

The USB Deskswitch is a KVM switch that enables users to control all the computers at their desk using a single keyboard and mouse. Operators and traders enjoy a fullyintegrated environment with intuitive switching between different sources by moving the mouse cursor across the border of a screen. Add extra functionality with valueadded Network CopyPaste software. At a glance Up to 4 PCs with a single USB Deskswitch Up to 16 PCs with multiple Deskswitches Individual hotkeys for different sources Mouse switching with multiresolution support (no software required for singlescreen sources) Network CopyPaste to share clipboard information between PCs in the same network (optional) Access USB 3.0 devices from up to 4 PCs

The smartVISUAL Receiver is the basis of WEYTEC‘s visualization solutions. Together with smartVISUAL master, they administer and control real and virtual video walls as well as decode and display video streams. smartVISUAL integrates separate displays into a continuous visualization surface. At a glance Resolutions up to 4K @60Hz Hardwarebased, without software installations Independent of operating system Video sources can be displayed in freely scalable windows on screens and video walls Unlimited number of sources and screens Redundant configuration Compatible and integrated with WEYTEC switchingPLATFORM, WEYTEC distributionPLATFORM and WEYTEC visualizationPLATFORM

Heat exchangers are mainly used in vacuum distillation systems for cooling and condensation in the absorption and rectification processes in chemical plants. Glass heat exchangers enable visual process control during scale-up and production and processing of multiple (acidic) chemical substances. We offer glass spiral type and shell & tube type heat exchangers. These are often operated in combination with a secondary condenser for additional vapor condensation. The glass spiral heat exchangers can be operated in parallel to form large heat exchange areas for higher condensation performances and larger reactors systems in pilot plants. They feature easy cleaning and operation of cooling media at up to 3 bar pressure.

Mit der Stereolithographie lassen sich exakte Urmodelle, Anschauungs- oder Funktionsmodelle herstellen – und das je nach Baugrösse innert Tagesfrist

Digitale Sensortechnologie Um heutzutage in der Produktionsbranche konkurrenzfähig zu bleiben, benötigen Hersteller äußerst zuverlässige Prozessanalyseinstrumente. Mit ISM®, der digitalen Sensortechnologie von METTLER TOLEDO, wird Ihr Wartungsaufwand planbar, die Sensorbedienung spielend einfach und Ihre Produktion effizienter.