Produktai skirti 240 (12)

Volume: 240 L -Dimensions: 605 x 745 x 1060 mm -Weight: 12,50 KG ( +/-5%) -Body and cover with warranty certificate, produced by injection system using high -Density polyethylene(HDPE). -Resistant to violet and infrared rays, acids, and alkalis, high and low air temperatures. -Combs arms are suitable for garbage truck lifting systems. -Material: HDPE -Wheels: 2 rubber 200*50 in size. -Temperature resistant: 30"C to +8O°C -The cover is hinged and can be leaned on the back and there are two arms for lifting.Lid hinges are plastic. -Solid rubber swivel wheel with a diameter of 200 mm. Electrolytically galvanized quality steel shaft. -It has -1 piece steel shaft. (Axle) -Desired labelling work can be done on the front body of the products. PRODUCT CODE:PCK-240

Danfoss HRH 034 U4LP6 (29.240 BTU) Fabricant:Danfoss Référence:16.45.034

240 Liter Packaging Waste ContainerThe raw materials used in containers are resistant to sunlight, heat and cold.Containers produced according to CE standards are certified according to ISO 9001:2008 and ISO 9001:14001 quality systems.Plastic garbage containers are manufactured according to TS EN 840 norms.The measurements given below are approximate and there may be +/- 5% deviation in the measurements. Product Code:TK-240-AMBA

7088 240 LT PLASTIC CONTAINER - Garbage Containers

The product is made of first quality galvanized sheet. - 2 wheels of 125 mm diameter are used for this container. -Containers have been welded with slag-free arc welding. -All of products used in containers are first quality and CE,ISO 45001:2018,ISO 10002:2018 certified. DIEMENSIONS HEIGHT:1000 MM DEPTH:500 MM WIDTH:500 MM PRODUCT CODE:MT-240

Our Metal Waste Container – 240 Liter product is made of A-1 quality galvanized sheet metal. It was made using gas welding.Our Metal Waste Container – 240 Liter product is made of A-1 quality galvanized sheet metal. All materials used are under TSE warranty.Welding was done using gas welding.It has 2 wheels.The measurements given above are approximate and there may be +/- 5% deviation in the measurements. Product Code:TK-240-MCK

Our metal galvanized waste containers can be specially produced in line with the technical specifications of the product. It can be produced as hot dip galvanized or original galvanized. It can be produced with and without pedal options. Apart from 240 liters, it can also be produced in 770 liters, 660 liters and 400 liters capacities. Cover lid color can be in different options.Body and cover 1.50 mm. made of sheet metal.The body is obtained from two pieces of sheet metal and given a form to increase strength in the press.The body mouth is surrounded by a profile.The cover has been press plastered from one piece of sheet metal and its strength has been increased.There are arms on the sides for loading.The carrier has 2 wheels in the size of 150 x 45 in accordance with the TS EN 12532 standard and 2 feet. PRODUCT CODE:TK-240-SDCK

240 Liter Hot Dipped Metal Galvanized Waste ContainerBody and cover 1.50 mm. It is made of sheet metal.The body was folded from two pieces of sheet metal and given a strength-increasing form in the press.The body mouth is surrounded by a profile.The cover is made of a single piece of sheet metal, plastered in a press to increase its strength.There are arms on the sides for loading.The carrier has 2 wheels of size 150 x 45 in accordance with TS EN 12532 standard and 2 legs.The base and sides are completely welded.The container is manufactured in accordance with the technical specifications and technical drawing and is equipped with a complete Hot Dip Galvanizing System.It is galvanized at 60-80 microns in accordance with TS EN ISO 1461 standard.The name of the municipality and the figure of a person throwing garbage are applied to the front surface. Product Code:TK-240-SDCK

240 Liter Plastic Waste Container with Pedal used raw material has sunlight, heat and cold.It has two wheels.The products have the feature of interpenetration.Pedals can be added optionally.Optionally, magnetic lock system can be added.Optionally, a waste cover can be added.Made from recyclable material.It can be easily opened, emptied and used.Its leak-proof feature has been obtained through tests.It retains its color and does not fade.It can be produced with 10 alternative colors.The measurements given above are approximate and there may be +/- 5% deviation from the measurements. PRODUCT CODE:TK-240-PPCK

Outer Dimension: 1060 x 580 x 740 mm240 Liter Plastic Waste Container used raw material has sunlight, heat and cold.It has two wheels.The products have the feature of interpenetration.Pedals can be added optionally.Optionally, magnetic lock system can be added.Optionally, a waste cover can be added.Made from recyclable material.It can be easily opened, emptied and used.Its leak-proof feature has been obtained through tests.It retains its color and does not fade.It can be produced with 10 alternative colors.The measurements given above are approximate and there may be +/- 5% deviation from the measurements. PRODUCT CODE:TK-240-PCK

It has a medical waste emblem.MEDICAL WASTES - Infectious WastesMicrobiological laboratory wastes (Culture and stocks, Infectious body fluids, Serological wastes,Other contaminated laboratory wastes (lamella, pipette, petri dish, etc.)Blood-blood products and objects contaminated with them.Used surgical clothes (fabric, apron, gloves, etc.)Dialysis wastes (waste water and equipment) Quarantine wastesAir filters containing bacteria and viruses Infected laboratory animal carcasses, organ parts, blood and all objects that come into contact with themPathological Wastes Body parts and organic parts originating from places such as operating rooms, morgues, autopsies, forensic medicine , placenta, amputated limbs, etc. (human pathological waste)Syringe needle, other sharps containing needles, scalpel, lam-coverglass, glass pasteur pipette, other broken glass, etc. PRODUCT CODE:TK-240-TAK

The raw materials used in containers are resistant to sunlight, heat and cold.Containers produced according to CE standards are certified according to ISO 9001:2008 and ISO 9001:14001 quality systems.Plastic garbage containers are manufactured according to TS EN 840 norms.The measurements given below are approximate and there may be +/- 5% deviation in the measurements. PRODUCT CODE:TK-240-AMBA