Produktai skirti 220 (175)

One-component mineral waterproofing slurry. For the preparation of a waterproof coating on concrete and other cementitious substrates. Maleki-DS 220 is a universal waterproofing mortar for a wide range of applications. Thanks to its high waterproofness and durability, it can be used even under the most difficult conditions. The product has been awarded the EMICODE EC 1PLUS label for very low-emission building materials. Packaging unit: 25 kg paper bag, 1050 kg per pallet – Article-No.: 1314

The HTSD-High Temperature Drum Heater is our high temperature drum heater (220 °C) and exclusively suitable for steel drums. The heating jacket is used in areas where large surfaces need heating over 90 °C. This barrel heater is available in four standard sizes (25 / 50 / 105 / 200 liters) and can be manufactured to customer specifications as well. HISD heater jackets are particularly suited to melt soaps, fats, varnishes and oil-based products, or respectively reduce their viscosity. The 200-liter element can be combined with the HBD - base drum heater to reduce the heat-up time. The heating element of the HTSD heating jackets is sewn into a fleece made of silicone-insulated fibreglass material. The insulating outer housing consists of a binder-free mat made of textile glass. The heating element is therefore double insulated (protection class II). An optimal contact with the barrel, as well as a quick assembly and dismantling are achieved by the use of quick release buckles. Max. temperature of insulation:220 °C Outer Material:Silicone - coated fibreglass Insulation Material:Fibreglass Protection class:II Cable length:4 meters Type of cable:HO7RN-F with Schuko-plug Fastening:Quick-release buckles control:Capillary pipe thermostat | optional: digital Thermostat Control range:20 - 220 °C Heating zones:1 Special sizes possible:yes

Paiement sécurisé Livraison à domicile Echange ou remboursement Référence:PRE192201

DWHI 220 HDA Zugkraft:22000 lbs/10000kg Trommelkapazität:60 m Gewicht:250 kg Spannung:Hydraulischer Antrieb Seilgeschwindigkeit:7m /min Öldruck:16/160 MPa/Bar Ölfluss:70 l/min Seildurchmesser:16 m Abmessungen (LxBxH):640 mm x 500 mm x 430 mm

ECO FAST ICE PACK 305×100-100 220 gram synthetic ice packs ready to freeze and with free transport.

Durch die schmale und innovative Bauweise, die hohe Anwenderfreundlichkeit und lange Lebensdauer setzt die Schlauchpresse HM 220 Maßstäbe für Qualität und Wirtschaftlichkeit. Ihre hohe Presskraft und die rundum gute Zugänglichkeit (beidseitige Bedienung sowie Bestückung möglich) bieten für das Verpressen von Nennweiten bis 1" 4 SH und bis zu 2" bei Industrieschläuchen alles was eine Produktionspresse zum Verpressen von hohen Stückzahlen von Hydraulikarmaturen benötigt. Die bewährte schmierungsfreie Gleitlagertechnologie senkt die Wartungskosten und ihre starke Presskraft bis 1350 kN runden das Bild ab. Bearbeitetes Produkt:Schlauch Funktionsmodus:automatische Betätigung:elektrohydraulische Weitere Eigenschaften:kompakte

Baujahr 2004 automatischer Anleger Sauganleger Liefertermin: sofort ab Lager Ref: MA240121A Preis auf Anfrage. Wir liefern und installieren weltweit!

Prima reinigingskwaliteiten: droog voor stof, nat met of zonder reinigingsproduct voor het verwijderen van vuil en vet. Toepassingen: Delicate oppervlakken, ateliers, schoonmaakbedrijven, … Afmetingen:38 x 38 cm - 40 x 60 cm - 50 x 60 cm Gewicht:200 g/m² - 220 g/m² - 220 g/m² Verpakking:50 zakjes/karton - 20 zakjes/karton - 40 zakjes/karton

Chainbar Oils are meticulously crafted by blending high-quality base stocks with carefully selected additives, resulting in a lubricant that delivers peak performance and long-lasting protection for chains and their sprockets. These oils are equipped with tackifiers that resist “throw-off,” ensuring a consistent and adhesive lubricating film remains on the chain mechanisms. This steadfast film serves to reduce wear and provides the full benefits of the anti-wear and anti-corrosion additive systems. Chainbar Oils are designed with a fluidity that makes them suitable for manual application or for use in units equipped with automatic oilers. They exhibit excellent penetration into chain links, ensuring comprehensive coverage and effective lubrication. Available in:Bulk, 1000 Litres, 200 Litres, and 20 Litres Item Code:VI8-2816 (100), VI8-2819 (150), VI8-2820 (220)

Mazak tube laser in very good condition Can be inspected under power upon appointment. Serviced by Mazak UK. ONLY 360 cutting hours (1 hour per week) !!! New turbine in July 2021 (13563 hours). Automatic and continuous 3D laser cutting of long structual material High precision cutting of complex features Unsurpassed 3D laser cutting of long round / square / rectangular pipe, as well as H, I and L beams Just load long material in the loading station, and 3D cutting is performed automatically as well as transfer of finished parts to the unloading station Manufacturer:MAZAK Model:3D Fabrigear 220 MKII Year:2015 Condition:Used Max. material length:6000 mm Max. workpiece length for unloading:6000 mm Max. material diameter:round pipe: o220 mm (8.6") square pipe: o1S0 mm (6',) Laser resonator output:2500W CNC Control:FANUC30ILB

Trochoidpumpe für Kühlwasser bei 1500rpm (50 Hz) 30 Liter bis 15 Bar Bei 1800rpm (60 Hz) 36 Liter bis 15 Bar Der Druck ist abhängig von der Leistung des Motors. ARTIKELNUMMER:1010080 HERSTELLER ART-NR:TOP 220 HWM

The 220 kVA diesel generator from Genpower Generator, the manufacturer in Turkey, is a reliable power source. It has an Perkins engine delivering 220 kVA and suits a wide range of applications. It comes with automatic or manual options and various alternator brands such as Genpower, Mecc Alte, Leroy Somer and Stamford. Additionally, it has both canopy and non-canopy options to fit different needs. It is a flexible and dependable solution for industrial, commercial, or residential use. Speed (RPM):1500 Model:GPR 220 Fuel Type:Diesel Frequency (Hz):50 Engine:PERKINS: 1106A-70TAG4 Voltage (V):231/400 Fuel Consumption (at 75% load) (l/h):34.7 Fuel Tank Capacity (L) (Open Type/Cab):375/376 Width (Open Type/Cab) (mm):900/1153 Height (Open Type/Cab) (mm):1673/2027 Length (Open Type/Cab) (mm):2650/2971 Weight (Open Type/Cab) (kg):1666/2096

Der BREITFLANSCHTRAGER HEB S235JR T-Profil Edelstahl HEB 220 ist ein äußerst robustes und leistungsstarkes Konstruktionsprofil, das aus Edelstahl der Werkstoffklasse S235JR gefertigt wird. Mit seinem großzügigen T-Profil und den breiten Flanschen bietet der HEB 220 außergewöhnliche Tragfähigkeit und Stabilität, wodurch er sich hervorragend für anspruchsvolle Bau- und Ingenieurprojekte eignet. Dank der Eigenschaften von Edelstahl, wie hoher Korrosionsbeständigkeit und langer Lebensdauer, ist dieser Träger besonders gut für den Einsatz in rauen Umgebungen und unter extremen Bedingungen geeignet. Der HEB 220 wird oft in großen Bauvorhaben, im industriellen Bereich und in anspruchsvollen Konstruktionsprojekten verwendet, bei denen hohe Belastungen und eine dauerhafte Zuverlässigkeit erforderlich sind. Die breite Flanschgeometrie sorgt für eine optimale Lastenverteilung und trägt zur Stabilität und Sicherheit der gesamten Konstruktion bei. Der HEB 220 ist somit eine ideale

Meuble mural modulable en métal epoxy noir avec étagères, penderie, tablette et caisson pour habiller votre magasin. Cette collection de meubles muraux est particulièrement adaptées à la présentation de textiles proposant étagères, facings, tablettes, penderie, caissons de stockage, signalétique, branding... Durable, solide, il vous permet d’agencer, d’aménager et d’habiller votre boutique en toute simplicité. Fiche produit standard de ce meuble étagère vêtements : Matériaux : bois, métal epoxy noir Poids : 17 kgs x2 Dimension : L160 x H220 x p47 cm Poids des cartons : 19 kgs x2 Dimension du carton : L85 x H225 x p10 cm x2

Ein umfangreiches Programm an Hochdruckventilen, Sicherheitsventilen und Überdrucksicherungen, abgestimmt auf die Pumpenleistungen - eine Eigenfertigung. Ebenso wie bei den Hochdruck-Plungerpumpen können diese Ventile mit Sonderdichtungen ausgestattet werden.

Composition: Precipitated silica LATSIL® 220 (S) is used as a flow and anticaking agents in plant nutrition and plant protection products. This precipitated silica recommended as a carrier in solid pesticide formulations such as WDG, WP etc. When considering the use of any Latro’s products in a particular application,you should review our latest Safety Data Sheet and ensure that the use you intend can be accomplished safely.For Safety Data Sheets and other product safety information,contact the Latro’s Sales Office nearest to you.Before handling any other products mentioned in the text,you should obtain available product safety information and take the necessary steps to ensure safety of use. Appearance:White powder Loss on drying (@ 105°C for 2 hrs.):max. %6,0 Bulk density,Tapped (While material packed):80 to 130 g/l pH (in 5% aqu. Suspn.):6,0 – 7,0 Water absorption:min. %260 Oil absorption:min. 240 cc/g DBP absoptipn:min. 260 cc/g Avg. particle size, d50:10,0-15,0 micron Residue on 325 mesh (Wet sieving):max. %1,0 SiO2 on anhydrous Basis:min. %98,5

Aluminum nitride ceramic thermal insulator pads are ceramic materials with outstanding properties such as high thermal conductivity and high electrical resistance. In addition, it is featured advantages such as high hardness, corrosion resistance, low dielectric constant and dielectric loss, and low CTE. Aluminum nitride ceramics have excellent thermal conductivity (7-10 times that of alumina ceramics), as the thermal expansion coefficient of silicon is similar, as a new generation of ceramic materials, more and more people pay attention to it. Regular Size： For Package Type: TO-3P / TO-220 / TO-247 / TO-264 / TO-3/TO-254/TO-257/TO-258, With Hole or Without Hole. TO – 3P, 25*20*1mm (other thickness is available, too); TO-220, 20*14*1mm (other thickness is available, too); TO-247, 22*17*0.635mm (other thickness is available, too); TO-264, 28*22*1mm (other thickness is available, too); TO-3, 39.7*26.67*1mm (Rhombus shape). For Package Type: : TO-3P / TO-220 / TO-247 / TO-264 / TO-3/TO-254/TO-257/TO-258, With Hole or Without Hole. Materials:Aluminum Nitride, Alumina (Al2O3)

Bétonnière manuelle Sirl 1600 Nombre de vitesses : 2 Dimension du filetage : M14 Conception ergonomique avec 4 caoutchoucs de protection Retrait facile du mélangeur Pouvoir:1600w Vitesse:0-760 rpm Diamètre de la tige de mélange:140mm Longueur:590mm Poids:23.5kg Type de produit:Betoneira Référence:297.B.00000.1601

220 LT - 150 LT - 120 LT Plastic Ring BarrelHDPE body produced in one step with blow molding technology,HDPE cover & gasket produced in one step with injection technology,Galvanized ring.

T BEND SERVO-HYDRAULIC Stable, flexible and economical. Our DB 3A-CNC series will win you over with its special stability and performance. A real power pack of a machine For pipes with diameters from 1/4" to 12 3/4". Innovative Servo-Hydraulic System - Energy savings up to 70% by control of the hydraulic pump via a servo motor. On demand system only runs when hydraulic pressure is required; reducing the overall duty cycle and increasing lifecycle of all hydraulic components. The DB 3A-CNC mandrel bending machine performs tight radius bends with the highest quality. The machine meets all industry standards and exceeds customer expectations. The Software – Simple and intuitive manual input by machine operator with 3D graphical display. Import module allows easy import of step files from Tekla and other detailing systems. Tube diameter:40 - 220 mm Max. Wall thickness:12,0 mm (for tube-Ø 220 mm in S235) Usable length:6096 mm (Standard) Power bending axis:electro-hydraulic

Polo Pima cotton luxury di migliore qualita', per donna, colletto nello stesso tessuto e abbottonatura sottile con bottoni antracite perlato con logo, spalle rinforzate, taglio sartoriale, prodotto di alta gamma. Personalizzabile anche con logo per brand, con ricami fine ed elegante di qualita'. Imballo con imbusto singolo in busta eco-sostenibile. quantita' minima:10 campione disponibile:2/5 gg personalizzazione:ricamo o stampa tessuto:Pima cotton Spedizione:in tutto il mondo Prezzo:a preventivo Tempi produzione:10 gg Uso:tempo libero, sport, moda Packaging:Imbusto singolo Colori disponibili :Bianco, nero, grigio scuro, blu navy, verde lord

Natürliche Farbe Eco-Taschen sind ein neuer Trend bei Menschen, die einfache und praktische Dinge lieben und sich um die Umwelt kümmern. * 140 g/m² Eco-Taschen - 200 Stück pro Karton * 220 g/m² Eco-Taschen - 140 Stück pro Karton * Größe: 38x42 cm (+-1 cm) * Griffgröße: 2,5x72 cm (+-1 cm) * Farbe: natur/ecru

La superficie de apoyo, con altura regulable, del soporte para barril ofrece espacio para colocar el recipiente de trasiego directamente debajo de la salida de las bombas de barril. De este modo se evita el peligro de que el líquido salpique durante el trasvase desde gran altura – p. ej. cuando el recipiente de trasiego está sobre el suelo. Además, el usuario tiene libres las dos manos durante el llenado y pueden trasvasarse cómodamente cantidades mayores. También puede colocarse una balanza bajo el recipiente en la superficie de apoyo, de este modo puede calcularse con precisión el líquido que debe ser trasvasado. El soporte puede utilizarse para bombas Bürkle con boquilla o tubo de descarga. Los tubos de descarga pueden insertarse fácilmente en el soporte para tubos. Puede usarse con barriles de plástico y de acero inoxidable. Material:Acero inoxidable V2A

Nous fabriquons les statues sculptures en résine fibrée , la peinture est faite entièrement à la main et elle résine aux UV et gel . Chaque sculpture est personnalisable .

Messer passend für Zünd-Schneidplotter

Recycled paper with double-sided coating Anti-slip coating with high friction coefficient Easy to use 100% recyclable ISO 9001 certification Tertiary packaging, indirect food contact Provides load stability Sheet laying manually or automatically Standard pallet sizes. Other sizes on order. 3000 sheets per pallet Available in sheets and rolls

ART. 280 CERNIERE TIPO ASE IN ACCIAIO VERNICIATO NERO Confezione:12 Dimensioni (mm):30 x 220 x 2,0+2,0

Accessoires pour générateurs Aspirateur - pour table JOLLY 220 V

It closes the standing seam panels at a 180° angle with a fast and easy way. Working width 220 mm.Working width 220 mm It is the hand seamer used for locking the panels produced by “R-PRO 25” Standing seam profiling machine. Double lock standing seam metal roof system is designed to prevent water from entering the panels. Standing seam panels cover each other when installed on the roof, so there is no space in between. Using Reis Standing Seam roofing tools, the areas where the panels come into contact with the waterproofing are closed. QUALITY and TRUST – REIS STANDING SEAM TECHNOLIGIES Every manufactured “Roofing Tools” goes through delicate tests. Roofing tools have a long life thanks to precision welding and proccesing of high quality materials. Standing seam hand seamers are made of solid and long-lasting first quality steel with a special oven paint. ​​​​​​ Power saving, ergonomic, convenient.

Kit for 796 HC Tipo:simple COD:1040A000 Breve descrizione:<b> Ø88</b> Stato delle imposte:taxable Aliquota di imposta:iva-22 Prezzo di listino:600 Categorie:MOTO Tag:Ducati Classe di spedizione:Kit pistoni da 2 pz Posizione:36 Cylinder Bore:88.00 valuta(e)| visibile 1 | globale 1 N. Cyl.:2 valuta(e) | visibile 1 | globale 1 C.H.:25.40 valuta(e) | visibile 1 | globale 1 Con-Rod Housing:24.50 valuta(e) | visibile 1 | globale 1 Pin Bore:18.00 valuta(e) | visibile 1 | globale 1 Dome /Dish cc's:22, 6 cc valuta(e) | visibile 1 | globale 0 Complete Piston Weight gr.(± 5 ):381 g valuta(e) | visibile 1 | globale 0 note:visibile 1| globale 0