Produktai skirti 150v 12 eilutė storėjimas (9)

The SE electronic stabilizers are designed for continuous operation and guarantee maximum reliability and minimum maintenance, and have been offered in our production range for more than 50 years. The SE stabilizers are products called ”electronic”, because both the control and the regulation system are purely electronic. Our stabilizers take advantage of the principle of the series transformer to increase or to decrease the value of the input voltage in a gradual and rapid way through the secondary winding in series of a transformer supplied by power triacs and controlled by an electronic board with microprocessor at high speed. The principle of the stabilization in alternating current is to add or to subtract to mains voltage a voltage with the same frequency and in-phase or out-of-phase (180°), always taken by the mains, in order to turn back the output voltage within the planned range. The supplying voltage of the series transformer is given by power triacs, driven by an electronic board that, constantly verifying the value of the output voltage, provides to supply the series transformer up to the attainment of the nominal voltage. So far SE stabilizers have been installed in several African Countries, like Nigeria and Angola, to stabilize voltage coming from power stations very far from towns or villages, which use that energy.

"The demand for speed control has taken off with the advent of IGBTs and powerful microprocessors. Today, there is no longer any difference between DC and AC. 99% of new installations will be equipped with variable speed AC solutions. In our product range, we have both DC and static frequency inverters. Characteristics of a static frequency inverter: OPEN LOOP CONTROL - Single and three-phase power supply between 200 and 480V - Digital inverter - Solution only in 1 or 2Q - Possible braking via chopper and resistor - Power between 0,37kW and 22kW - IP20 protection - Modular drive - We have a stock up to 22kW in single and three phase CLOSED LOOP REGULATION - Single and three-phase power supply between 200 and 500V -Digital dimmer -Solution only in 1 or 2Q -Braking possible via chopper and resistor -Power between 1,3kW and 900kW -IP00/IP20/IP54 protection -Modular drive We have a stock up to 160kW in three-phase 400V"

Single-phase primary switched-mode power supply in metal housing. Note: Closed version with screw fittings with contact protection. Overload protection due to current limit, auto recovery. Protected against short-circuit, overload and surges. Power on LED indicator. For DIN top hat rail mounting. Technical data: Rating: IP00 Protection class: I Standard: UL508, TUV EN60950-1, CE Connection: screw terminals with contact protection Fastening: installation on DIN rail TS-35/7.5 or 15 Reference:82100-10 Temperature range:-10°C to +70°C

Rein Sinus-Ausgang (THD <5% @ Normale Ladung@12.5V / 25V / 50V) RS-232-Kommunikation Power ON / OFF-Fernbedienung (grüne LED) Remote-Controller CR 8 / CR16 (optional) Eingang & Ausgang voll isolierter temperatur-und lastgesteuerter Lüfter Verbauter Mikroprozessor für benutzerfreundliches Interface Ausgangsfrequenz 50/60 Hz DIP-Schalter wählbar Ausgangsspannung DIP-Schalter wählbar Energiesparmodus einstellbar, Widerstand wählbar Tri-Farbindikatoren Anzeigestatus AC-Transfer-Funktion Zubehör (TR40) Schutz: Eingangsüberspannung / Übertemperatur / Überlast / Kurzschluss / Verpolung

Das Entladenetzteil EN 9 Sine versorgt HAUG Ionisationsgeräte mit Energie.

für Elektromagnete Bei industriellen Elektromagneten kommen Sie mit Spielzeugtrafos nicht weit. Hier sind Ausrüstungen wie Varistoren zum Überspannungsschutz gefragt oder EMV Angaben wie eine hohe Störfestigkeit nach EN50082-2 für den Industriebereich. Ihr Nutzen: Spannt 230V AC auf 24V±1% DC. Ausgang ungeerdet. Weiter Eingangsspannungsbereich gestattet den Einsatz in instabilen Netzen. Mit Potentiometer ausgerüstet zur Anpassung der Ausgangsspannung ±10% bei langen Leitungen. Die Ausgangseite verzeiht Dauerkurzschluss und Dauerleerlauf. Produkteigenschaften zu Ihrem Vorteil Tragschienenmontage (DIN EN 50022). gekapselt, für den Einbau im Schaltschrank. frontseitige Schraubanschkussklemmen. Umgebungstemperatur 0°C bis +60°C. Selbstkühlung durch natürliche Konvektion. Schutzart IP 00 Schutzklasse 1. Betriebsanzeige mittels LED. Autom. Abschaltung bei Innentemp. >135°C.

Frequenzumrichter M100, 0,4kW - 2,2kW, IP20, 230V

Las fuentes de alimentación de la serie UC se realizan con tecnología de tiristores. Por esta razón aseguran una alta fiabilidad en cualquier condición de trabajo, como, por ejemplo, en presencia de fuertes cambios de temperatura o la caída de rayos.

24VDC / 5VDC 10A