Produktai skirti 150 (27)

TAPPO / COPERCHIO (2) ETICHETTA AUTOADESIVA (3) STAMPA OFFSET (4) STAMPA DIGITALE (5) SLEEVE (6) VERNICIATURA SCATOLA (8) PLASTIC FREE PACKAGING SECONDARIO (9) PLASTIC FREE NASTRO

PIEMME è un’azienda moderna, leader nel comparto agro-alimentare e liquoristico, che produce il Limoncello, i Babà e le sue specialità nel rispetto della tradizione. PIEMME nasce nel 1969 per iniziativa di artigiani sorrentini dediti alla produzione di specialità dolciarie a base di limone e del più tradizionale Limoncello. Sulla base di questa storica ricetta, tramandata di famiglia in famiglia, e grazie ad un know how tecnologico innovativo, dal 1986 il tipico infuso di bucce di limone di Sorrento, unitamente al babà, diventa prodotto e vanto di PIEMME. CONFEZIONE DA 2 1 PZ = EURO 17,00 1 PALLET 40 CONFEZIONI DA 2 SCADENZA 31/05/ 2025

Armaglass Pulnet 150 Closed cell polyethylene foam kerb, compressible, to properly size the depth of the expansion joints (creation of the "third wall" or base material) before filling them with the polymeric sealants Protech Flex or EG 91. It is available in profiles of circular cross-section of different diameter that will fit joints of any shape and size. ARMAGLASS PULNET 150 is a fiberglass mesh obtained by pultrusion process, made with epoxy resin, for internal reinforcement of permanent concrete structures and repairs using structural cement mortars. Monolithic GFRP mesh made with E-Cr glass yarn bars and pultruded epoxy resin, intertwined in a monolithic form, thus ensuring perfect durability even in particularly aggressive environments where resistance to corrosion induced by chemical agents or stray currents becomes a requirement essential. Filling the "joint base" for any type of joint between prefabricated elements, infills, bodies of different structures, partitions, doors and window frames, flooring, prior to laying the elastic sealant in the joint itself. The diameter of Filtene Fondogiunto should be about 25% greater than the width of the joint to allow a stable positioning of the profile and create sufficient resistance to the pressure exerted by the sealant during extrusion. Push with a tool with a rounded tip (free of sharp and pointy edges), capable of crossing the width of the joint, Filtene Fondogiunto, up to the desired depth and so as to leave on the surface an adequately deep seat for the subsequent sealant. Normally the depth of the sealing should be about half the width of the joint. Polyethylene foam is unaffected by solvents contained in the primers, but it is a good idea never to apply the adhesion promoter Protech Flex Primer on Filtene Fondogiunto, in order not to alter the anti-adherence properties. FILTENE can then be inserted into the joint after applying the primer, when the "dust-free time" is attained. Product to be purchased as needed. Bulk material 1 unit

Instant ice bag containing urea and a water bubble. To activate the bag, crush the water bubble inside the bag, an instant cooling process will develop. Device used in cases of haematomas, traumas, sprains, dislocations, hyperthermia and in all cases in which instant cold is needed.

Integrated plant to cut, optimize and stock the bars, based on a shear CHV 160, mounted on a fixed frame, with blade of 160 mm (6''), VBM1 measuring and cutting track with mobile ledge, with oneside unloading. Blade width:160 mm (6") Cuts per minute:16

Cuscineria Tavolo Gavoni in PVC Chiusura gavoni di poppa Bitte ormeggio Lunghezza mt:5,00 Larghezza mt:1,80 Portata:1 x 40 hp Portata persone n:6 persone

The linear motion potentiometers series PR have a 26 mm diameter round section housing and 5 mm diameter shaft. Their measuring strokes range from 25 to 150 mm, and their standard resistive value is 5 KOhm. The conductive plastic resistive element grants the transducer a long life (100,000,000 motions), high independent linearity and virtually infinite resolution. The IP65 protection degree against environmental agents allow to employ the potentiometers series PR for severe applications, even outdoors, at extreme temperatures. The potentiometer PR mounting method is extremely easy: it can be fixed by means of metal clamping brackets, or by the front screw thread. Several fittings are available: ball joint, self-aligning joint, feeler pin. Resistive Element:Conductive plastic Resolution:Infinite Strokes:25 to 150 mm Resistance:1 KOhm, 5 KOhm Housing:Aluminium, 26 mm diameter Shaft diameter:5 mm Fixing:by movable feet or ball joints

ART. 121 CERNIERE LEGGERE A "T" IN ACCIAIO ZINCATO Confezione: 10 Dimensione(mm): 150 x 1,5

13.150 Tipologia:Punzone Amada-Promecam Angolo:85° Raggio:R0.80 Altezza:175.00 mm Resistenza:Max 70 T/m Acciaio:1.2312 Bonificato Lunghezze:L 835 mm

SEMI-ELECTRIC LIFTER MOD. FPE 150 A/200 H Manual traction and electric lifting, suitable for lifting loads weighing up to 150/100 kg. up to a height of 1500/2000 mm. Practical and easy to handle with manual traction and electric lifting, the mod. FPE 150 A is able to lift loads with maximum weight of 150 kg to a height of 1500 mm, while mod. FPE 200 H lifts loads up to 100 kg to a maximum height of 2000 mm. The small size and light weight makes it suitable in shops, workshops, offices, kitchens, etc.. The battery 24 V-12 Ah. maintenance free, combined with a robust motor and electronic control with overload protection ensures safe and reliable operation. The battery charger is integrated. To ensure maximum safety, the lifting system is equipped with fall arrester belt. Capacity:Kg. 150 Maximum lifting height:mm. 1500 Lowered fork height:mm. 130 Frame height with wheels:mm. 110 (to insert the lifter under a pallet you need to buy the lowered frame) Machine dimensions:mm. 860 x 600 x 1800 h. Lifting speed:approximately 23 sec (65 mm/sec) to 1500 mm stroke approximately 34 sec (58 mm/sec) to 2000 mm strok Battery:24 V. – 12 Ah.

Valvola a sfera flangiata ANSI 150 API STANDARD 608, super duplex, a passaggio totale, scartamento secondo norma ASME B16.10, Fire Safe, dispositivo antistatico. Limiti di temperatura:-10° +180° Vuoto:10-3 torr

APRILIA 125/150 Leonardo/ST CODICE ORIGINALE:AP8102582 SKU:G 636

CAP / LID (2) SELF-ADHESIVE LABEL (3) OFFSET PRINTING (4) DIGITAL PRINTING (5) SLEEVE (6) PAINTING BOX (8) PLASTIC FREE SECONDARY PACKAGING (9) PLASTIC FREE TAPE

Prova il gusto irresistibile di Fanta, prodotta in Italia con succo di arance 100% Italiane, per la tua pausa frizzante e divertente. Acqua;Succo di arancia da concentrato (12%);Zucchero;Anidride carbonica;Acidificante acido citrico;Aromi naturali di agrumi;Stabilizzante gomma d'acacia;Antiossidante acido ascorbico; CONFEZIONE DA 6 1 PZ = EURO 1,00 1 PALLET 84 COLLI SCADENZA 30/10/2025 MINIMO D'ORDINE 30 PALLET

Bevanda analcolica Nuovo Gusto Irresistibile INGREDIENTI : Acqua Zucchero Anidride carbonica Acidificante acido citrico Aromi naturali di limone e limetta Correttore di acidità citrato trisodico Gusto limone e limetta (lime) Senza aggiunta di conservanti Con aromi naturali CONFEZIONE DA 6 PZ 1 PZ =EURO 1,00 1 PALLET 84 COLLI SCADENZA 23/07/2025 MINIMO D'ORDINE 30 PALLET

PIEMME è un’azienda moderna, leader nel comparto agro-alimentare e liquoristico, che produce il Limoncello, i Babà e le sue specialità nel rispetto della tradizione. PIEMME nasce nel 1969 per iniziativa di artigiani sorrentini dediti alla produzione di specialità dolciarie a base di limone e del più tradizionale Limoncello. Sulla base di questa storica ricetta, tramandata di famiglia in famiglia, e grazie ad un know how tecnologico innovativo, dal 1986 il tipico infuso di bucce di limone di Sorrento, unitamente al babà, diventa prodotto e vanto di PIEMME. CONFEZIONE DA 2 1 PZ = EURO 17,00 1 PALLET 40 CONFEZIONI DA 2 SCADENZA 31/ 04 / 2026 MINIMO D'ORDINE 20 PALLET

ART. 530 CERNIERE PESANTI A MOLLA A SINGOLA AZIONE IN ACCIAIO Confezione:2 Dimensioni (mm):150 Pollici:6

ART. 520 CERNIERE PESANTI A MOLLA A DOPPIA AZIONE IN ACCIAIO OTTONATO, BRONZATO Confezione:2 Dimensioni (mm):150 Pollici:6

ART. 330 CERNIERE LUNGHE IN ACCIAIO ZINCATO – perno fisso Confezione:24 Dimensioni (mm):30 x 150 x 1,6 Pollici:6

The linear motion potentiometers series PR2S have a 26 mm diameter round section housing, 5 mm diameter shaft and two ball joints at the ends. Their measuring strokes range from 25 to 150 mm, and their standard resistive value is 5 KOhm. The conductive plastic resistive element grants the transducer a long life (100,000,000 motions), high independent linearity and virtually infinite resolution. The IP65 protection degree against environmental agents allow to employ the potentiometers series PR2S for severe applications, even outdoors, at extreme temperatures. AVAILABLE STROKES mm 25 – 50 – 75 – 100 – 150 AVAILABLE RESISTIVE VALUES 5 KOhm (standard) – Optional: 1 KOhm for PR2S 25 Resistive Element:Conductive plastic Resolution:Infinite Strokes:25 to 150 mm Resistance:1 KOhm, 5 KOhm Housing:Aluminium, 26 mm diameter Shaft diameter:5 mm Fixing:by movable feet or ball joints

Thanks to their small size – 21 mm square section case – the linear potentiometers seris PT2S can be profitably employed for those applications where limited dimensions are a critical factor. Two ball joints are provided at both ends for air fixing. The series strokes range from 25 to 150 mm. The electrical connection is granted by means of M12 connector. The stout extrused aluminium case grants a high protection degree against environmental agents. Resistive Element:Conductive plastic Resolution:Infinite Strokes:25 to 150 mm Resistance:1 KOhm, 5 KOhm Housing:21 mm aluminium Shaft diameter:5 mm Fixing:by movable feet or ball joints Connections:M12 connector

Thanks to their small size – 21 mm square section case – the linear potentiometers seris PT can be profitably employed for those applications where limited dimensions are a critical factor. The series strokes range from 25 to 150 mm. The electrical connection is granted by means of M12 connector. The stout extrused aluminium housing grants a high protection degree against environmental agents. Resistive Element:Conductive plastic Resolution:Infinite Strokes:25 to 150 mm Resistance:1 KOhm, 5 KOhm Housing:21 mm aluminium Shaft diameter:5 mm Connections:M12 connector

MANUAL LIFTER BY WINCH MOD. M 200 Practical and easy to handle allows to lift loads with maximum weight of 150 kg to a height of mm. 1500 mm. The winch with crank allows to lift the load with minimum effort and through the automatic brake can block the ascent at any point of lifting. The descent of the load can only occur if the operator acts on the winch intentionally and causes the gradual descent. Equipped with steel rope, vertical push handles, parking brake on steering wheels, painted steel structure. Are available accessories for lifting and rotation of reels. The product comes with the standard support surface. The cart can be equipped with other accessories by purchasing them separately. Capacity :Kg. 150 Max. lifting height:mm. 1500 Lowered fork height:mm. 130 Platform dimensions:mm. 470 x 600 Frame height with wheels:mm. 110 - to insert it under standard pallets you need a spacer under the pallet or the frame with l Machine dimensions:mm. 870 x 600 x 1790 h.

BATTERY FORKLIFTER FPBINGO 150 N Forklift with manual traverse and lift battery. Available with platform, forks or spike reel holder. Complete with battery charger. The lifter lifting speed without charge is approximately 17 seconds (90 mm/sec.) for the total stroke up to 1500 mm. The product comes with the standard support surface but it can be equipped with other accessories by purchasing them separately. Load:Kg. 150 Lifting height:from min 140 mm to max 1500 mm No-charge lifting speed:approximately 17 seconds (90 mm/sec) Overall dimensions:mm. 500 x 850 x 1960 h Battery:24V – 16 Ah

Valvola a sfera flangiata tipo Wafer in acciaio inox A351-CF8M, a passaggio totale, dispositivo antistatico. Limiti di temperatura:-20° +160° Vuoto:10-3 torr

Valvola a sfera flangiata ANSI 600 API STANDARD 608, in acciaio al carbonio A352-LCC zincotropicalizzato, a passaggio totale, scartamento secondo norma ASME B16.10, Fire Safe, dispositivo antistatico. Limiti di temperatura:-10° +180° Vuoto:10-3 torr

PIAGGIO 125/150 Hexagon 2T (94/97 – est./grande) 125/180 Hexagon LX 2T (98/99 – est./grande) CODICE ORIGINALE:434363